The Cascos 125 Monolift is a single post 2.8 tonne capacity vehicle lift which has been a favourite of ours for over 30 years. Manufactured by Cascos in Spain to the highest standards, this lift is extremely strong in structural quality and has a high quality safety system which is CE Approved. This is a electro-mechanical lift driven by screw and safety nuts the screw being a massive 45mm, one of the largest on the market today. Ideally suited to the garage with space for a car to stand, but not enough room to install a two-post lift for instance. An excellent choice for body-shops when re-panelling, re-painting, welding, or when access to the full side of a car is paramount. Supplied as standard with 4 x 100mm, 4 x 150mm extension tubes for lift pads. ** 2 Year full Parts and Labour warranty. This product includes delivery and installation to your premises within the UK. Some of the Scottish Highlands & Islands may incur extra delivery costs, if you are located in these regions, please ring before you buy. Price Promise : We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go. Please Note Pricing : All Purchase Prices quoted below include 20% vat. (On any Purchases a full VAT Invoice will be supplied) CASCOS 125 Single Post Lift Our Prices Cash & Lease : (subject to Finance Company Approval) 3 phase version £3,845.00 + vat (or £18.63 + vat per week on a 5 Year Lease/Buy) 1 phase version £4,075.00 + vat, (or £19.75 + vat per week on a 5 Year Lease/Buy)
Are you struggling to cope with the heavier vans, 4x4's and cars coming through your workshops? Then the Cascos C5.5 two post lift is probably the lift for you? This model comes supplied with a full steel base for a more stable lifting condition and is the highest quality you would expect from Cascos. Not only does this model boast a very respectful lifting capacity of 5500kgs it also has a drive-through width of 2810mm between the posts and is fitted with 4 x 3 stage lifting arms with a very low pick-up height of only 110mm, exceptionally low considering its lifting capacity. All four lifting arms give a closed length of 705mm but extend to 1335mm when fully open making them very diverse for heavy vans, 4 x 4's and most cars. In addition because all the arms are the same length the lift is bi-directional allowing your vehicles to be driven-on or reversed-on without compromising the lifting capacity. The engineering supremacy of this lift means that larger vehicles when lifted feel reassuringly safe. Note : This vehicle lift is available in three-phase supply only. Supplied in New colour combination, Blue and Grey from November 2019. **Delivered and installed at your premises with a full 24 months Parts and Labour warranty. Some of the Scottish Highlands & Islands may incur extra delivery costs, if you are located in these regions, please ring before you buy. Price Promise : We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go. Please Note Pricing : CASCOS C5.5 Two Post Van Lift Cash Price £6,785.00 + vat (£8,142.00) Lease price, subject to Finance Company Approval. 3 Year Lease/Buy (3ph) £60.04 including vat, per week. 5 Year Lease/Buy (3ph) £39.46 including vat, per week.
The Cascos C4 'Syncro' two post is probably our all-time favorite lift. Using the same twin-motor and PLC principle of the C3.2 Syncro, plus fitting 4 x triple stage arms and increasing the lifting capacity enable maximum scope for short pick-up points close together and long when far apart. The sheer engineering supremacy means that even larger vehicles feel reassuringly safe on this lift.
We hear it everyday, I bought it to lift long wheelbase vans, its says 5000kgs capacity but the arms just aren't long enough? All too often customers make the mistake of buying a lift that's not suitable for large vans simply because they are looked at the tonnage and not the arm length of the lift. The Cascos C5.5 is a genuine 'van lift', designed specifically for LWB models, fully approved by Mercedes-Benz, Renault and Peugeot to name just a few.
The Cascos C125 single post lift is ideal for garages that simply don't have space for a conventional 2 post or scissor lift. This single post lift option makes for the perfect solution for that unused area! Produced in Spain and largely unchanged for over 40 years, the C125 a is perfect example of traditional engineering standing the test of time.
Similar to the Cascos C4 model but with the benefit of a wider distance between the upright posts. The C4XL is an excellent choice when working on wider expensive cars & vans. Fitted with 4 x three stage arms and in our opinion another best two post car lift money can buy. Take this extra width into consideration when planning your workshop, if you can fit it in, its worth every penny extra.
The CASCOS C3.2 Syncro Sport is fully baseless with symmetrical arm configuration, its biggest asset is the very low pick-up point of the lifting pads, 85mm. This makes it ideal for workshops repairing low bodied cars. This traditionally built lift from Cascos offers quality, longevity and reliability all day and everyday. These lifts are found in workshops everywhere, they just keep on going….and going….and going!
The CASCOS C3.2 Syncro Confort is fully baseless with Asymmetric arm configuration another best selling lift from our two post range! Its a classic, that doesn’t mean to suggest it is old-fashioned, but it is certainly traditional in its build quality, they can be found in workshops everywhere, and they just keep on going….and going….and going!
The CASCOS C3.2 Comfort model is with steel base and asymmetric arm configuration, it can only be described as a classic from our two post lift range! That doesn’t mean to suggest it's old-fashioned, but is certainly traditional in its build quality, they can be found in workshops everywhere, and they just keep on going….and going….and going!
The CASCOS C3.2 Syncro is a baseless model with symmetric arm configuration, it can only be described as another classic from our two post lift range! That doesn’t mean to suggest it's old-fashioned, but it's certainly traditional in its build quality, they can be found in workshops everywhere, and they just keep on going….and going….and going!
