AC Hydraulic - AXGE

HGV Jacking Beam (Single Ram for Vehicle Lifts) 6t, 12t, 16t & 20tonnes

FL-1 Range of Lift Jacking Beams

AC Hydraulic offer, "in our opinion" the very best high quality HGV Jacking Beams on the market today. The FL-1 range (single-ram jacking beams) are designed to be used on four post lifts and come in four lifting capacities, 6 t, 12 t, 16 t & 20 tonnes. All four models are Air Hydraulic in operation, built using a single individual ram and offering safe lifting of HGV vehicles. The ram can move transversely from side to side enabling easy location of lifting points. Fitted with a rapid and precise air hydraulic unit enabling high speed ram travel plus a simple modern design with control panel at an ergonomical working height. These jacking beams will fit almost every commercial lift on the market today due its adjustable frame and selection of end brackets. To ensure a guaranteed fit to your four post lift, we need the dimensions of the jacking rails, platform depth, width, lighting bars etc, etc. (We do have a simple survey form to complete) However if you want to go ahead and Order your product we will make contact with you to ensure the detail gets completed in full. Special Offer "FREE ADAPTOR SET" : This jacking beam is currently offered with a set of everyday adaptors F.O.C, Usual Price £192.00 + vat. This product includes delivery, to your premises within the UK. Some of the Scottish Highlands & Islands may incur extra delivery costs, if you are located in these regions, please ring before you buy. Price Promise : We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go. Please Note Pricing : All Purchase Prices below include 20% vat. a Full VAT Invoice will be supplied.

40 tonne capacity hydraulic press

The AC Hydraulic hydraulic junior presses are suitable for light industry and passenger car workshops and are simply the best in the business. Pneumatically controlled and fitted with a high speed ram which traverses along the framework making it very diverse for easy alignment of any work-piece. Available in 16 or 20 tonne capacity these presses can be operated by hand or by foot, when being operated by foot the hands are left free to enable alignment of the piece being pressed. Includes as standard : Built-in pressure gauge at convenient eye level. Built-in safety overload valve. Hand operated handle. Foot operated pedal. Welded frame and press table made from high strength steel for longer life. Removable ram end cap for mounting of various piston heads. Supplied with 2 "V" blocks supplied as standard. Our Prices include, delivery direct from the factory to your premises. Some of the Scottish Highlands & Islands may incur extra delivery costs, if you are located in these regions, please ring before you buy. Price Promise : We promise never to be beaten on price by our competitors, if you see a price advertised cheaper than us, we will match it for you, no problem! We simply need to make sure the item you have seen is identical and in our stock, and then we’re good to go. Warranty : See details of extensive warranty below. AC Hydraulic Press pricing : PJ25H 25 tonne hydraulic press £1,130.00 inc vat. Optional PJW - Winch to adjust crossbeam £119.00 inc vat. Optional PJS - Set of press tools £102 inc vat. Optional Protection screen £242.00 inc vat.

25 tonne Hydraulic press PJ25H

Staying with the exceptionally high build quality of AC Hydraulic we offer this 25 tonne capacity air hydraulic press. With all the features of the 16 & 20 tonne models, the PJ25H gives you that little bit extra. The PJ25H is also Certified to ISO 9001:2015 quality standards. Still not enough tonnage, then look through the rest of our hydraulic presses. The range is massive offering presses from 16-100 tonnes with manual, air and electric pump options there will always be a model for your workshop needs. AC Hydraulic Press pricing : PJ25H - 25 tonne hydraulic press £1,400.00 + vat = £1,680.00 Includes, direct delivery to your site. Options available : PS25 - Protection Screen £339.00 plus vat PJW - Winch for easy adjustment of crossbeam £145.00 plus vat PJS - Press tools (3 piston heads, one adaptor) £125.00 plus vat Pricing & Warranty : See below details of our price promise and extensive warranty.

15t HGV Transmission Jack GGD150U

AC Hydraulic offer, "in our opinion" the very best high quality transmission jacks on the market today. The model GGD150U transmission jack is no exception to that rule, the ideal choice for repairers involved in truck & bus repairs, heavy commercial plant and agricultural machines. Standard specification :

Axle Stands

When you buy a set of Axle Stands produced by AC Hydraulic you are buying the highest quality, longest lasting equipment. These are not cheap Chinese copy products, they are the real thing, take a look at the massive range offered below.

16, 20 & 25 tonne Hydraulic Press

When you want the best hydraulic press on the market you want one from AC Hydraulic. To ensure a constant high build quality and reliability every product is tested before shipment, the in-house quality management system means the equipment is certified to ISO 9001:2015.

40 tonne hydraulic press

Staying with the highest quality presses on the market is the P40H and HL 40 tonne hydraulic presses with hand and foot pedal operated controls. Easy to use and extremely high quality, one of the best hydraulic presses on the market today.

40 tonne electro-hydraulic press P40EH1

The AC Hydraulic, 40 tonne electro-hydraulic press with easy to operate hand controls is extremely high quality having a regulated control of the tonnage to be pressed. One of the best hydraulic presses on the market today and favored by our commercial customers.

60 tonne air hydraulic press

The AC60, 60 tonne air-hydraulic press is fitted with hand and foot pedal operated controls. Easy to use and extremely high quality, one of the best hydraulic presses on the market today. Another press popular with our commercial customers.

60 tonne electro hydraulic press

60 tonne electro-hydraulic presses, with easy to operate hand controls. Choice of two models P60EH1 & P60EH2 with single stage or two stage ram. Extremely high quality with regulated control of the tonnage to be pressed. One of the best hydraulic presses on the market today.

In-ground Hydraulic lift - Swing Arm

Inground hydraulic two post lifts, fast reliable and extremely quiet. Maximise your floor space and clear the workspace of all those posts by putting them underground. Once you have used this style of two post lift, quite honestly, nothing else will do.

In-ground Hydraulic lift - Platform Style

Inground hydraulic two post platform lifts, fast reliable and extremely quiet. Maximise your floor space and clear the workspace of all those posts by putting them underground. Once you have used this style of two post lift, quite honestly, nothing else will do.

AC SD40PHL Jacking Beam 4.0 tonne

The model SD40PHL model is air over hydraulic and easy to operate. The extra lifting capacity makes this jacking beam the ideal choice for a busy Class 7 MOT Bay or the workshop working all the time on heavier vehicles. As always the quality of these jacking beams is extremely high.

Automatic Air hydraulic Jacking Beams

Yes you read it right "Automatic jacking beam". If you are a busy MOT Testing or Service center, why not take the strain out of the job with our automatic jacking beam. When working under the car simply position the lifting pads under the vehicle using joystick control. Forget the possibility of repetitive strain injury to you or your staff.

HGV Jacking Beam for Inspection Pit, single ram

GD-1 Single Ram Jacking Beam

The AC Hydraulic GD-1 single ram commercial jacking beam is extremely diverse in its operation. Exceptionally strong, well manufactured with three lifting capacities 10, 15 & 20t. A massive piston stroke and a large selection of accessories makes this pit jack extremely diverse as a traditional jacking beam or if required a transmission jack.

HGV Jacking Beam for Four Post Lift

The AC Hydraulic "FL-1 Range" of jacking beams are available in, 6, 12, 16 and 20t lifting capacities. They are single ram with air hydraulic operation and designed for use on a four post lift. Extremely high quality and probably the best available on the market today.

HGV Jacking Beam for inspection Pit.

The GD-2 range of AIR HYDRAULIC jacking beams are designed for use in Inspection pits. These models are choice of our commercial workshop customers again and again. They are a twin ram design for quick and stable lifting in your workshop. Superb quality, very heavy duty in design and in three capacities of 10, 15 & 20 tonnes.

HGV Jacking Beams for Inspection Pit - Copy

GD-2M Range of Jacking Beams Inspection Pit with Autolock

If you need a new jacking beam for your Inspection Pit and require the right lifting capacity, high end quality, reliability and safety all rolled into one, look no further. The AC Hydraulic GD-2M range of jacking beams are built for the job and include the unique "AUTOMATIC RAM LOCK SAFETY SYSTEM".

HGV Jacking Beam for Four Post Lift

If you need a new jacking beam for your vehicle lift and require the right lifting capacity, high end quality, reliability and safety all rolled into one, look no further. The AC Hydraulic FL-2M range of jacking beams are built for the job and include the unique "AUTOMATIC RAM LOCK SAFETY SYSTEM".

HGV Transmission & Pit Jack for Heavy Gearboxes

The GDT150-1 HGV air hydraulic jacking beam is very diverse and can be used as a Jacking Beam or as a transmission Jack. With 15 tonnes lifting capacity, extra long telescopic ram and huge selection of adaptors it offers endless possibilities when working on heavy vehicles of all types.

300kgs capacity Transmission Jack

AC Hydraulics offer, "in our opinion" the very best high quality selection of transmission jacks on the market today. The model VL3 is typically one of those products, ideal for use in all garage workshops.

600 kgs capacity Transmission Jack

AC Hydraulics offer, "in our opinion" the very best high quality selection of transmission jacks on the market. The model VL6 is typically one of those products, ideal for use in all garage workshops with 600 kgs lifting capacity.

Transmission Jack "Extra Low" 600kgs capacity

The AC Hydraulics model VLT6 "in our opinion" is the very best high quality transmission jack on the market for this category of height, weight, capacity etc. Due to its extremely low closed height, it is ideal for use in the car, van, light commercial and commercial workshop.

1000 kgs Transmission Jack hydraulic

AC Hydraulic Transmission Jacks "in our opinion" the very best high quality selection of transmission jacks on the market today. The model VL10 is typically one of those products, ideal for use in all garage workshops. With 1000 kgs lifting capacity, pedal operated foot pump leaving both hands free for working with precise adjustment for positioning of transmission.

15t HGV Transmission Jack GGD150S for inspection pit

The AC Hydraulic GGD150S Transmission jack is air hydraulic in operation and designed to be installed on fixed rails in your inspection pit.

HGV Transmission Jack GGD150U 15 tonnes

The AC Hydraulic model GGD150U "in our opinion" is the very best high quality transmission jack on the market today. The ideal choice for repairer involved with trucks, buses, heavy commercial plant and agricultural machines. In fact if you're regularly repairing large vehicles of any description and want a safe controlled lifting procedure then the GGD150U is the product for you.

HGV Transmission Jack GDT150-1

AC Hydraulic offer, "in our opinion" the very best high quality HGV Jacking Beams on the market today. The GDT150-1 is a single ram, air hydraulic, 15 tonne lifting capacity jacking beam, but take a closer look and not your average jacking beam offering dual purposes.

15t HGV Transmission Jack GGD150F fixed ram

AC Hydraulic offer, "in our opinion" the very best high quality transmission jacks on the market today. The model GGD150F transmission jack is no exception to that rule, the ideal choice for repairers involved in truck & bus repairs, heavy commercial plant and agricultural machines. In fact if you're regularly repairing large vehicles of any description and want a safe controlled lifting procedure then the GGD150F is the product for you.

2.0t or 2.6t Manual operation Jacking Beam

The AC Hydraulic models SD20L & SD26L are extremely high quality, manually operated jacking beams. Designed for lifting cars and vans with the greatest of ease and supplied as standard with the necessary brackets to enable fitment to your four post lift, scissor lift or inspection pit.

2.0t and 2.6t Air hydraulic Jacking Beams

SD20PHL / SD26PHL

The AC Hydraulic models SD20PHL & SD26PHL are extremely high quality, air hydraulic operated jacking beams. Designed for continually lifting cars and vans with the greatest of ease and supplied as standard with the necessary brackets to enable fitment to your four post lift, scissor lift or inspection pit.

3.2 tonne Air hydraulic Jacking Beam

The AC Hydraulic models SD32PHL is an extremely high quality, air hydraulic twist button operated jacking beam. Designed for lifting cars and vans with the greatest of ease and supplied as standard with the necessary brackets to enable fitment to your four post lift, scissor lift or inspection pit.