Transmission Jacks

AX Garage Equipment offer a diverse range of Transmission Jacks. There's a jack to lift everything from the smallest gearbox to the largest piece of plant or machinery, take a look at the range below.

300kgs capacity Transmission Jack

AC Hydraulics offer, "in our opinion" the very best high quality selection of transmission jacks on the market today. The model VL3 is typically one of those products, ideal for use in all garage workshops.

600 kgs capacity Transmission Jack

AC Hydraulics offer, "in our opinion" the very best high quality selection of transmission jacks on the market. The model VL6 is typically one of those products, ideal for use in all garage workshops with 600 kgs lifting capacity.

Transmission Jack "Extra Low" 600kgs capacity

The AC Hydraulics model VLT6 "in our opinion" is the very best high quality transmission jack on the market for this category of height, weight, capacity etc. Due to its extremely low closed height, it is ideal for use in the car, van, light commercial and commercial workshop.

1000 kgs Transmission Jack hydraulic

AC Hydraulic Transmission Jacks "in our opinion" the very best high quality selection of transmission jacks on the market today. The model VL10 is typically one of those products, ideal for use in all garage workshops. With 1000 kgs lifting capacity, pedal operated foot pump leaving both hands free for working with precise adjustment for positioning of transmission.

1200 kgs HGV Transmission Jack

AC Hydraulic Transmission Jacks "in our opinion" the very best high quality selection of transmission jacks on the market today. The model VLT12 is typically one of those products, ideal for use in HGV and Industrial workshops, fitted with a two-stage ram, low closed height and extremely high maximum height when required.

HGV Transmission Jacks from MAJORLIFT, 1 tonne.

Majorlift transmission jacks for HGV's can be purchased as a floor standing unit, for use under a vehicle lift, mobile columns or within an inspection pit. There are 4 models in this range, all have a 1000kgs lifting capacity.

HGV Transmission Jacks from MAJORLIFT, 2000kgs

Majorlift transmission jacks for HGV's can be purchased as a floor standing unit, for use under a vehicle lift, mobile columns or within an inspection pit. There are 4 models in this range, all have a 2000kgs lifting capacity.

15t HGV Transmission Jack GGD150S for inspection pit

The AC Hydraulic GGD150S Transmission jack is air hydraulic in operation and designed to be installed on fixed rails in your inspection pit.

HGV Transmission Jack GGD150U 15 tonnes

The AC Hydraulic model GGD150U "in our opinion" is the very best high quality transmission jack on the market today. The ideal choice for repairer involved with trucks, buses, heavy commercial plant and agricultural machines. In fact if you're regularly repairing large vehicles of any description and want a safe controlled lifting procedure then the GGD150U is the product for you.

HGV Transmission Jack GDT150-1

AC Hydraulic offer, "in our opinion" the very best high quality HGV Jacking Beams on the market today. The GDT150-1 is a single ram, air hydraulic, 15 tonne lifting capacity jacking beam, but take a closer look and not your average jacking beam offering dual purposes.

15t HGV Transmission Jack GGD150F fixed ram

AC Hydraulic offer, "in our opinion" the very best high quality transmission jacks on the market today. The model GGD150F transmission jack is no exception to that rule, the ideal choice for repairers involved in truck & bus repairs, heavy commercial plant and agricultural machines. In fact if you're regularly repairing large vehicles of any description and want a safe controlled lifting procedure then the GGD150F is the product for you.